Panasonic KX-FL511AL - Manual (Page 40)

7. Programmable Features
38
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=2 [ ±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “
2” (default), “3”, “4”, “5”, “6”, “7”,
“ 8” or “9”. If you are using the unit with an
answering machine, set to more than 4 (page
32).
Code #12: Enabling remote operation for an
answering machine
REMOTE TAM ACT.
=OFF [ ±]
If you are using the unit with an answering
machine, activate this feature, and program the
remote activation ID to enable remote operation
of the answering machine.
1. Press {MENU}.
2. Press {#} then {1}{2}.
3. Press {A} or {B} repeatedly to select “ ON”.
4. Press {SET}.
5. Enter your ID from 1 to 5 digits, using 0–9,
{*} and {#}.
L The default ID is “ 11”.
6. Press {SET}.
7. Press {MENU}.
Code #13: Setting the dialling mode
(For Australian users only)
DIALLING MODE
=TONE [ ±]
If you cannot dial, change this setting depending
on your telephone line service.
“
TONE”(default): For tone dial service.
“ PULSE”: For rotary pulse dial service.
Code #17: Setting the ringer pattern
RINGER PATTERN
=A [ ±]
You can select “ A” (default), “B” or “C”.
7.3 Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
=ON [ ±]
“ ON” (default): The unit will print a journal report
automatically after every 30 new fax
communications (page 27).
“
OFF”: The unit will not print a journal report, but
will keep a record of the last 30 fax
communications.
Code #23: Sending documents overseas
OVERSEAS MODE
=ERROR [ ±]
If you have difficulty sending an overseas fax,
activate this feature before starting transmission.
L This feature is not available for broadcast
transmission.
L The calling charge may be higher as the
transmission speed is slowed down.
“ NEXT FAX”: This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
“
ERROR” (default): When the previous fax
transmission fails and you wish to re-send the
document automatically.
“
OFF”: Deactivates this feature.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF [ ±]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. Press {MENU}.
3. Press {#} then {2}{5}.
4. Press {A} or {B} repeatedly to select “ ON”.
5. Press {SET}.
6. Enter the fax number.
7. Press {SET}.
8. Enter the transmission start time.
L Press {*} repeatedly to select “ AM” or
“ PM”.
9. Press {SET}.
L To cancel after programming, press {STOP}
then {SET}.
Code #26: Setting the Caller ID list to print
automatically
AUTO CALL. LIST
=ON [ ±]
FL511AL.book Page 38 Tuesday, October 7, 2003 2:18 PM