Storing and recalling broadcast, Frequencies, Introduction of advanced – Pioneer Premier DEH-P490IB User Manual

Page 11: Operations, Storing the strongest broadcast, Tuning in strong signals 11, Operating this unit, Storing and recalling broadcast frequencies, Introduction of advanced operations, Storing the strongest broadcast frequencies

Advertising
background image

Storing and recalling broadcast
frequencies

If you press any of the preset tuning buttons

1

to

6 you can easily store up to six broadcast

frequencies for later recall with the touch of a
button.
! Up to 18 FM stations, six for each of the

three FM bands, and six AM stations can
be stored in memory.

% When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.

# You can also use a and b to recall radio sta-
tion frequencies assigned to preset tuning but-
tons

1 to 6.

Introduction of advanced
operations

% Press FUNCTION repeatedly to switch
between the following functions:
BSM (best stations memory)

—LOCAL (local

seek tuning)

# To return to the frequency display, press
BAND.
# If you do not operate the function within about
30 seconds, the display is automatically returned
to the frequency display.

Storing the strongest broadcast
frequencies

BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons

1 to 6.

Once stored you can tune in to those frequen-
cies with the touch of button.

! Storing broadcast frequencies with BSM

may replace broadcast frequencies you
have saved using buttons

1 to 6.

1

Press FUNCTION to select BSM.

2

Press a to turn BSM on.

Six strongest broadcast frequencies will be
stored in the order of their signal strength.

# To cancel the storage process, press b.

Tuning in strong signals

Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.

1

Press FUNCTION to select LOCAL.

2

Press a to turn local seek tuning on.

Local seek sensitivity (e.g.,

LOCAL 2) appears

in the display.

# To turn local seek tuning off, press b.

3

Press c or d to set the sensitivity.

There are four levels of sensitivity for FM and
two levels for AM:
FM:

LOCAL 1

—LOCAL 2—LOCAL 3—

LOCAL 4
AM:

LOCAL 1

—LOCAL 2

The

LOCAL 4 setting allows reception of only

the strongest stations, while lower settings let
you receive progressively weaker stations.

Operating this unit

En

11

English

Section

02

Advertising