Multi-cd player, Basic operations 28, Introduction of advanced – Pioneer Premier DEH-P490IB User Manual
Page 28: Operations, Available accessories, Basic operations, Introduction of advanced operations
Multi-CD Player
Basic Operations
You can use this unit to control a multi-CD
player, which is sold separately.
! Only those functions described in this man-
ual are supported by 50-disc multi-CD
players.
1 Disc number indicator
2 Track number indicator
3 RPT indicator
Shows when repeat range is selected to
TRACK or DISC.
4 RDM indicator
Shows when random play is on.
5 Play time indicator
1
Press SOURCE to select the multi-CD
player.
2
Press a or b to select a disc you want
to listen to.
# You can also select a disc by using 1 to 6 but-
tons.
! For discs 1 to 6, press the corresponding
button number.
! For discs 7 to 12, press and hold the corre-
sponding numbers, such as
1 for disc 7,
until the disc number appears in the dis-
play.
3
To perform fast forward or reverse,
press and hold c or d.
4
To skip back or forward to another
track, press c or d.
Notes
! When the multi-CD player performs the pre-
paratory operations,
READY is displayed.
! If an error message such as ERROR-11 is dis-
played, refer to the multi-CD player owner
’s
manual.
! If there are no discs in the multi-CD player ma-
gazine,
NO DISC is displayed.
Introduction of advanced
operations
You can use
COMP/DBE (compression and
DBE) only with a multi-CD player that supports
them.
Function mode 1
% Press FUNCTION repeatedly to switch
between the following functions:
REPEAT (repeat play)
—RANDOM (random
play)
—SCAN (scan play)—ITS-PLAY (ITS play)
—PAUSE (pause)—COMP/DBE (compression
and DBE)
# To return to the playback display, press BAND.
# If you do not operate the function within about
30 seconds, the display is automatically returned
to the playback display.
Function mode 2
% Press FUNCTION and hold repeatedly to
switch between the following functions:
TITLE IN (disc title input)
—ITS (ITS program-
ming)
# To return to the playback display, press BAND.
Function and operation
REPEAT, RANDOM, SCAN, PAUSE,
COMP/DBE and TITLE IN operations are basi-
cally the same as that of the built-in CD player.
Available accessories
En
28
Section
03