Panasonic CQ-D5501U - Manual (Page 8)

15
14
E
N
G
L
I
S
H
CQ-D5501U
14
13
E
N
G
L
I
S
H
CQ-D5501U
General (Main Unit)
(continued)
Open the Face Plate
Press [u] (OPEN).
Note:
¡The face plate automatically closes after a warning alarm
sounds if no operation is performed for approximately
20 seconds.
¡ When a disc is already loaded ( lights), the disc
will be ejected after the face plate fully opens.
(Disc Eject
a Page 22)
Close the Face Plate
Press [u] (OPEN).
Face Plate Angle (Tilt)
Press and hold [u] (TILT) until you hear a beep (approxi-
mately 1 second) from the speaker output, then release it.
Set the face plate to the position at which it is easy to read
what is on the display. Each time the above operation is
repeated, the face plate angle changes in the sequence
shown below.
Note:
¡The positions specified at “Face Plate Angle (Tilt)” are
memorized even after the following operations.
¡Open/close
¡ACC on/off
TILT 1
TILT 2
TILT 3
OPEN
TILT OFF
Clock Display (at Power off)
When the power of the unit is set to OFF, press [DISP].
(Clock time) (Default)
(Display off)
When the power is set to ON, refer to the description for
each source mode.
[DISP]
[u: Eject]
(TILT/OPEN)
Caution
¡Do not pinch your finger or hand in the face plate.
indicator