Photogenic Professional Lighting AKC160 - Manual (Page 11)

11
SPECIFICATIONS
AKC160 & AKC160B
General:
Flash Power....................................................5 to 160 watt-seconds.
(6 f-stops)
Flash Duration................................................1/175 second at Full
1/700 second at ½
1/1300 second at ¼
1/2400 second at 1/8
1/4100 second at 1/16
1/7400 second at 1/32
Recycling time................................................0.01 to 1.5 seconds
Power Control.................................................Full to 1/32 range.
(6 f-stops)
0.1 f-stop resolution.
Flash Color......................................................5400
±200° Kelvin
Modeling Light Power ...................................100 Watt, 120 VAC, S3629.
Modeling Light Control .................................ON or OFF.
Triggering ......................................................Built in Photoslave.
Push to Test button.
Synchronization Jack.
Main Supply .................................................105-125 VAC, 50/60 Hz, 3 amp.
Consumption ................................................ 1 amps idling,
5 amps charge.
Overload Protection .......................................Fuse. 3AG type,
8 Amp, SLO-BLO.
Packaging .......................................................Molded, high-impact, plastic
case.
Weight ............................................................2 pounds, 2 ounces.
Dimensions (housing only).............................5.25”W x 5.25”H x 7”L
Flashtubes and Modeling Lamps:
Flashtube ....................................................Plug-in style, use only
Photogenic’s Standard C4-12
Modeling Lamp ..........................................100-Watt, 120 VAC, ESR.
[NO LARGER WATTAGE]
Fuse ............................................................3AG type, 8 Amp, SLO-BLO
.