Photogenic Professional Lighting AKC160 - Manual (Page 5)

5
Thumb screw to hold reflector.
Umbrella holder (shaft passes
through knock-out in reflector.)
Thumb screw for umbrella shaft.
AC line cord jack.
Modeling lamp.
Flashtube.
Reflector, soft box,
bare bulb, or other
“quick-change”
attachments.
CONTROL PANEL AND BASIC OPERATION:
Power Input:
The power required to operate the StudioMax III is 105 to 125 volts AC,
50/60 Hz, 4 Amp, and/or, for a B (battery) model, an approved DC battery
power pack (not included). The power cord has a 125V, 10 Amp. rating.
Replacement cords or extension cords rated for less amperage may
overheat and should not be used with StudioMax III.