Attaching the lens hood/lens cap – Panasonic DMC-FZ10GN User Manual

Page 19

Advertising
background image

Preparation

19

Attaching the Lens Hood/Lens Cap

Preparation
• Check that the camera is turned off and that the lens is retracted.
• Close the flash.

ª Lens Hood

1

1 Detach the lens ring.
2 Attach the lens hood.

• In bright sunlight or when there is

backlight, the lens hood will
minimize lens flare and ghosting.

• The lens hood cuts off excess

lighting and improves the picture
quality.

• When detaching the lens hood,

refer to P116.

ª When attaching the lens hood

• When taking pictures with flash, photo

flash is interrupted by the lens hood
and the bottom of the screen becomes
dark. (vignetting effect)

• When taking pictures with flash, we

recommend detaching the lens hood.

ª Lens Cap

1

Attach the lens cap.

• Be careful not to lose the lens cap.

ª When attaching the lens cap

• When you turn the camera off, carry

the camera or play back the pictures,
attach the lens cap to protect the
surface of the lens.

• Detach the lens cap before turning on

the camera in the recording mode.

• Consult the dealer or your nearest

servicentre if you lose the supplied
accessories. (You can purchase the
accessories separately.)

FZ10-GN.book 19 ページ 2003年12月24日 水曜日 午前10時39分

Advertising