Panasonic DMC-FZ10GN - Manual (Page 39)

Recording pictures (basic)
39
Compensating the Exposure
Use this function when you cannot achieve appropriate exposure due to the
difference of brightness between the subject and the background.
Preparation
• Set the mode dial except for [
]/[ ]. (P28)
1 Press 3 until [ EXPOSURE]
appears on the screen to
compensate the exposure.
• You can compensate from j2 EV
to i2 EV in steps of 1/3 EV.
¬Suggestions/Tips ¬
• EV is an abbreviation of Exposure
Value, and it is the amount of light
given to the CCD by the aperture
value and the shutter speed.
• The compensation range of the
exposure will be limited depending on
the brightness of the subject.
• The exposure compensation value
appears on the lower left of the
screen.
• The exposure value is memorised
even if the camera is turned off.
• You cannot compensate the exposure
in manual exposure.
EXPOSURE
SET
WB
REVIEW
SET
WB
REVIEW
SET
WB
REVIEW
EXIT SELECT
FZ10-GN.book 39 ページ ２００３年１２月２４日 水曜日 午前１０時３９分