Philips CD360 - Manual (Page 17)

17
Switch the handset On/Off
Press and hold •
exit
END
to switch off the
handset. The handset’s screen turns off.
Note
When the handset is switched off, no call can •
be received.
Press • exit
END
to switch on the handset. It
takes a few seconds for the handset to
power up.
3
Select [DATE FORMAT] or [TIME
FORMAT].
4
Select the setting. Select [DD/MM][MM/
DD] as the date display and [12 HOURS]
or [24 HOURS] as the time display. Then
press [OK] to confirm.
The setting is saved. »
What is standby mode?
Your phone is in standby mode when it is idle.
The standby screen displays the handset name,
handset number, date and time, signal icon, and
battery icon.
Check the signal strength
The signal icon displays the link status •
between the handset and base station. A
steady icon means your handset and the
base station are linked. A flashing icon
means your handset and the base station
are not linked.
Ensure the handset is linked to the base
•
station before you make or receive calls
and carry out the phone functions and
features.
If you hear warning tones when you are
•
on the phone, the handset is almost out
of battery or the handset is out of range.
Charge the battery or move the handset
nearer to the base station.
English
EN