Philips CD360 - Manual (Page 38)

38
Note
Ensure that the answering machine is switched •
on before this feature can be applied.
Tip
When you access the answering machine •
remotely, you are recommended to set the
ring delay to [ECONOMY] mode. This is a
cost effective way to manage your messages.
When there are new messages, the answering
machine picks up the call after 3 rings; When
there is no messages, it picks up the call after
5 rings.
Remote access
You can operate your answering machine
when you are away from home. Simply make
a call to your phone with a touch tone phone
and enter your 4-digit PIN code.
Note
The preset remote access PIN code is 0000. •
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Press menu.
2
Select [ANSW. MACHINE] >
[SETTINGS] > [REMOTE ACCESS],
then press [OK] to confirm.
3
Select a new setting, then press [OK] to
confirm.
The setting is saved. »
3
Press [OK] to confirm.
All old messages are permanently »
deleted.
Note
You can delete the read messages only. No •
deleted messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Then you can decide whether or not
to talk to the caller directly.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
Set the sound quality of the message
You can adjust the sound quality of the
messages received from the answering
machine.
1
Press menu.
2
Select [ANSWER MACHINE] >
[SETTINGS] > [MSG QUALITY], then
press [OK] to confirm.
3
Select the new setting, then press [OK]
to confirm.
The setting is saved. »
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
Press menu.
2
Select [ANSWER MACHINE] >
[SETTINGS] > [RING DELAY], then
press [OK] to confirm.
3
Select a new setting, then press [OK] to
confirm.
The setting is saved. »
EN