17 frequently asked questions – Philips CD360 User Manual

Page 42

Advertising
background image

42

No display

Ensure the batteries are charged.

Ensure there are power and phone

connections.

Bad audio (crackles, echo, etc.)

The handset is nearly out of range. Move

it closer to the base station.

The phone receives interference from

the nearby electrical appliances. Move the

base station away from them.

The phone is at a location with thick

walls. Move the base away from them.

The handset does not ring.

Ensure the handset ringtone is turned on.
When I see “Waiting...” on the screen, what is

happening with the phone?

The phone is recalling the memory of the

phonebook and call log. Both information are

stored in the base station. Then the handset

retrieves the data from the base station after

a few seconds. When you press

call ID

/

Ph.Book

, the

call log/phonebook information is displayed on

the handset.
The caller ID does not display.

The service is not activated. Check with

your service provider.

The caller’s information is withheld or

unavailable.

I cannot make/answer a 2nd call, what do I do?

Service is not activated. Check with your

service provider.

Ensure the recall duration is selected

correctly.

Note

If the above solutions do not help, disconnect

the power supply from both the handset and

base station. Try again after 1 minute.

17 Frequently

asked questions

The signal icon flashes.

The handset is out of range. Move it

closer to the base station.

If the handset displays [UNREGISTERED],

register the handset.

Tip

For more information, see “Register the

handsets” on the Advanced settings section.

IF I fail to register the additional handsets to

the base station, what do I do?
Your base memory is full. Unregister the unused

handsets and try again.
No dialing tone

Check your phone connections.

The handset is out of range. Move it

closer to the base station.

No parking tone

The handset is not placed properly on the

cradle.

The charging contacts are dirty.

Disconnect the power supply first and

clean the contacts with a damp cloth.

I cannot change the settings of my voice mail,

what do I do?
The voice mail service is managed by your

service provider but not the phone itself.

Contact your service provider to change the

settings.
The handset on the charger does not charge.

Ensure the batteries are inserted

correctly.

Ensure the handset is placed properly on

the charger. The battery icon animates

when charging.

Batteries are defective. Purchase new

ones from your dealer.

EN

Advertising