Sound controls, Sq (sound quality), Audio modes (bass/treble/balance/fader) – Panasonic CQ-5800U User Manual
Page 11
11
Sound Controls
CQ-5800U
SQ (Sound Quality)
SQ is a function that can call up various sound types at the
touch of button in accordance with your listening music type.
Press
[SQ]
for more than 2 seconds to select the sound type as
follows:
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
(VOCAL) clear sound:
emphasizes middle tone and slightly
emphasizes treble.
(FLAT) flat frequency response:
does not emphasize any part.
(default)
Audio Modes (Bass/Treble/Balance/Fader)
1
Push
[SEL]
to select the audio mode.
Note:
If no operation takes place for more than 5 seconds in audio
mode (2 seconds in volume mode), the display returns to the regular
mode.
2
Turn
[VOL] (volume)
clockwise or counter-
clockwise to change each level.
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
(Setting Range: 15 levels each and 0 (center),
Default: CNT)
(Setting Range: 15 levels each and 0 (center),
Default: CNT)
(Setting Range: 0 to 40, Default: 18)
q
:
Increased
w
:
Decreased
q
:
Increased
w
:
Decreased
q
:
Right enhanced
w
:
Left enhanced
q
:
Front enhanced
w
:
Rear enhanced
q
:
Up
w
:
Down
(Bass)
(Volume)
(Treble)
(Balance)
(Fader)
SQ indicator