Panasonic CQ-5800U - Manual (Page 20)

20
XM Satellite Radio Control
CQ-5800U
Preparation:
¡Connect the optional XM Direct 2 (CNP2000UC) with optional Connection Cable (CNPPAN1).
Getting Started
It is required to sign up to become an XM Satellite Radio
subscriber. After checking your XM Satellite Radio ID, sign up
on the XM’s website or by calling them.
1
Check of XM Satellite Radio ID
¡ Write down the ID indicated on the carton of your
XM receiver XM Direct
2 (CNP2000UC).
¡ Check the ID shown by tuning your XM Radio to
channel 0.
2
Activate the XM Satellite Radio. Select either
of the below to sign up.
¡ Web site: http://www.xmradio.com/activation
¡ Phone number: 1-800-852-9696
Band
Press [BAND] to change the band.
Channel Selection
[TUNE s ] : Lower
[TUNE d ] : Higher
Notes:
¡ “RADIO ID” is displayed with channel 0.
¡ “UPDATING” is displayed during the update of the identifica-
tion code.
¡ “LOADING” is displayed during the acquisition of audio data
or information.
Preset channel selection
Press the corresponding preset button from [1] to [6] to tune in
a preset channel.
Caution
To ensure safety, never attempt to preset stations
while you are driving.
Selection by Category
( a page 21)
Display change
( a page 21)
(Satellite) indicator
indicates the satellite receiver is ready.