Basic operations turning the unit on, Selecting a source, Loading a disc – Pioneer DEH-P75BT User Manual

Page 16: Turning the unit on, Basic operations

Advertising
background image

Turning the unit on

% Press SOURCE to turn the unit on.
When you select a source, the unit is turned
on.

Selecting a source

You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 27).

% Press SOURCE to select a source.
Press

SOURCE repeatedly to switch between

the following sources:
Tuner

—Television—DVD player/Multi-

DVD player

—Built-in CD player—Multi-

CD player

—iPod—External unit 1—Exter-

nal unit 2

—AUX1—AUX2—Telephone—

BT Audio

Notes

! In the following cases, the sound source will

not change:
— When there is no unit corresponding to the

selected source connected to this unit.

— When there is no disc in the unit.
— When there is no disc in the DVD player.
— When there is no magazine in the multi-

CD player.

— When there is no magazine in the multi-

DVD player.

— When the AUX (auxiliary input) is set to off

(refer to page 86).

— When the BT Audio source is set to off

(refer to Activating the

BT Audio source on

page 89).

! External unit refers to a Pioneer product (such

as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of

them to external unit 1 or external unit 2 is
automatically set by this unit.

! When this unit’s blue/white lead is connected

to the vehicle

’s auto-antenna relay control

terminal, the vehicle

’s antenna extends when

this unit

’s source is turned on. To retract the

antenna, turn the source off.

Loading a disc

1

Press EJECT to open the front panel.

CD loading slot appears.

# After a CD has been inserted, press SOURCE
to select the built-in CD player.

2

Insert a CD into the CD loading slot.

Front panel is closed automatically, and play-
back will start.

CD loading slot

# You can eject a CD by pressing EJECT.

Notes

! The built-in CD player plays one standard, 12-

cm or 8-cm CD at a time. Do not use an adap-
ter when playing 8-cm CDs.

! Do not insert anything other than a CD into

the CD loading slot.

! There is sometimes a delay between starting

up CD playback and the sound being issued.
When being read,

Format read is displayed.

Basic Operations

En

16

Section

03

Advertising