Using balance adjustment, Introduction of audio adjustments, Audio adjustments – Pioneer DEH-P75BT User Manual

Page 79

Advertising
background image

Introduction of audio
adjustments

1

1

1

1 Audio display

Shows the audio adjustment status.

1

Press MULTI-CONTROL to display the

main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.

2

Use MULTI-CONTROL to select AUDIO.

Turn to change the menu option; press to se-
lect.
The audio function name appears on the dis-
play.

3

Turn MULTI-CONTROL to select the

audio function.
Turn

MULTI-CONTROL clockwise or counter-

clockwise to switch between the audio func-
tions in the following order:
Fader (balance adjustment)

—PWRFL (graphic

equalizer adjustment)

—50Hz (7-band graphic

equalizer adjustment)

—LOUD (loudness)—

Sub W.1 (subwoofer on/off setting)

—Sub W.2

(subwoofer setting)

—Bass (bass boost)—HPF

(high pass filter)

—SLA (source level adjust-

ment)

—ASL (automatic sound levelizer)

# You can select the Sub W.2 only when sub-
woofer output is turned on in

Sub W.1.

# When selecting the FM tuner as the source,
you cannot switch to

SLA.

# To return to the display of each source, press
BAND.

Note

If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Using balance adjustment

You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.

1

Use MULTI-CONTROL to select Fader.

Fader appears in the display.

# If the balance setting has been previously ad-
justed,

Balance will be displayed.

2

Push MULTI-CONTROL up or down to

adjust front/rear speaker balance.
Each time

MULTI-CONTROL is pushed up or

down, the front/rear speaker balance moves
towards the front or rear.
F 15 to R 15 is displayed as the front/rear
speaker balance moves from front to rear.

# F/R 0 is the proper setting when only two
speakers are used.
# When the rear output setting is Rear SP :S/W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 87.

3

Push MULTI-CONTROL left or right to

adjust left/right speaker balance.
Each time

MULTI-CONTROL is pushed left or

right, the left/right speaker balance moves to-
wards the left or right.
L 15 to R 15 is displayed as the left/right
speaker balance moves from left to right.

Audio Adjustments

En

79

English

Section

14

Advertising