Prevention of blooming and smear, Specifications – Panasonic WV-C L924A User Manual
Page 41
Pick-up Device:
768 (H) x 494 (V) pixels, Interline Transfer CCD
Scanning Area:
6.45 (H) x 4.84 (V) mm (Equivalent to scanning area of 1/2” pick-up tube)
Scanning:
525 lines/60 fields/30 frames
Horizontal:
15.734 kHz
Vertical:
59.94 Hz
Synchronization:
Internal, Line-locked, External (VS/VBS) or
Multiplexed Vertical Drive (VD2) selectable
Video Output:
1.0 V[p-p] NTSC composite 75
Ω
/BNC connector
Horizontal Resolution:
480 lines (C/L), 570 lines (B/W)
Signal-to-Noise Ratio:
50 dB (AGC OFF, weight ON)
Minimum Illumination:
0.14 lx (0.014 footcandle) at F1.4 (C/L), 0.01 lx (0.001 footcandle) at F1.4 (B/W)
Gain Control:
AGC ON or OFF (SET UP MENU) selectable
White Balance:
ATW1, ATW2 or AWC (SET UP MENU) selectable
Aperture:
Variable (SET UP MENU)
-42-
SPECIFICATIONS
When the camera is aimed at a bright light, such as a
spotlight, or a surface that reflects bright light, smear or
blooming may appear. To avoid smear and blooming
the camera should be operated carefully in the vicinity
of extremely bright objects.
;
;
;
;
;
;
Bright object
Smear
PREVENTION OF BLOOMING AND SMEAR