Panasonic EB-X700 - Manual (Page 121)

118
CONNECTION SETTINGS
Access Point Settings
Access points are sets of configurations that connect your phone
to the Internet and other services. Your phone uses three main
sets of access points: Multimedia (MMS), Browser, and Internet.
Call waiting Press Options and select Check status. If
needed, select Activate. Network will send confir-
mation message. When activated, if you are on a
call and there is an incoming call, you can put the
first call on hold and answer the second call. See
Call Waiting on page 20.
Automatic
redial Select On to redial if the call is not connecting.
Press
to stop automatic redialling.
Summary after
call Select On to display a brief summary of duration
of last call.
Speed dialling Select On to start dialling by a press and hold of
preset number key in standby mode. First, set up
Speed dial keys in Settings (see Speed Dial on
page 131).
Anykey answer Select On to answer incoming calls by pressing
any key except , , or .
Active
clamshell Select On to answer a call by opening the flip
clamshell, and to disconnect phone calls by clos-
ing the flip clamshell. When set to Off and you
close the flip clamshell during a call, the caller’s
voice switches to the back loudspeaker.
Line in use This setting appears if you have subscribed to
Alternate Line Service, in which you can have two
different phone lines with the same SIM card.
Select Line 1 or Line 2.
Line change This setting appears if you have subscribed to
Alternate Line Service (see Line in use setting).
You can disable selection of one of the phone
lines. The PIN2 code is required to return use of a
previously blocked line.