Panasonic EB-X700 - Manual (Page 124)

121
GPRS Settings
From Settings application:
1. Open Settings.
2. Scroll to Connection and open.
3. Scroll to GPRS and open.
4. Open to edit:
Callback type
(Data call only) Select Use server no. for callback, or Use other
no..
Callback
number
(Data call only) Enter the phone number the callback server
should use.
Use PPP
compression
(Data call only) Select Yes to use PPP (Point-to-Point Protocol)
compression.
Use login script
(Data call only) Select Yes to use login script defined in Login
script field.
Login script
(Data call only) Enter the login script to be used.
Modem
initialisation
(Data call only) If desired, enter a modem initialisation string (AT
command string).
Note: If your wireless service provider has protected some of your
settings, you may not be able to modify them.
GPRS
connection Choose When needed to connect to GPRS ser-
vice only when you open an application that uses
GPRS. After you close the application, GPRS ser-
vice will disconnect.
Choose When available to stay continuously
connected when you are in a GPRS service area,
in which the GPRS icon replaces the signal
strength icon .
Access point Choose an access point supplied by your service
provider to use the phone as a modem to enable
GPRS connection from a computer.