Mounting the battery, Supplying power from the ac adapter – Panasonic AG-DVX100A User Manual
Page 21
21 (E)
ENGLISH
Mounting the battery
1
Raise the viewfinder.
2
Push the battery straight in, and slide it
downward until it clicks into position.
3
Return the viewfinder to its original
position.
5
Return the viewfinder to its original
position.
Supplying power from the AC adapter
1
Raise the viewfinder.
2
Push the battery-type connector on the
DC cable straight in, and slide it
downward until it clicks into position.
3
Connect the DC cable to the AC adapter.
4
Connect the AC cable to the power outlet.
Removing the battery
While pressing the battery eject button, slide
the battery upward to remove.
O
Set the POWER switch to OFF, and check
that the CAMERA/VCR lamp has gone off
before removing the battery.
O
Support the battery with your hand to
ensure that it will not drop.
1
2
3
Battery eject button
1
2
3
4
2
Connect the AC adapter correctly as
shown in the figure.
O
The battery cannot be charged while
supplying power from the AC adapter to the
camera recorder.