Pioneer VSX-919AH-S - Manual (Page 36)

Basic Setup 04
36
En
Chapter 4:
Basic Setup
Switching the speaker impedance
We recommend using speakers of 8 Ω with this
system, but it is possible to switch the
impedance setting if you plan to use speakers
with a 6
Ω impedance rating.
1 Switch the receiver into standby.
2 While holding down ENTER on the front
panel, press  STANDBY/ON.
The display shows RESET  NO .
Use TUNE +/– (or / on the remote control)
to select SPEAKER  8Ω , and then use
PRESET +/– (or / on the remote control) to
select SPEAKER 8
Ω or SPEAKER 6Ω.
• SPEAKER 8 Ω – Use this setting if your
speakers are rated at 8 Ω or more.
• SPEAKER 6 Ω – Use this setting if your
speakers are rated at 6 Ω.
Changing the TV format setting
If the Graphical User Interface screen is not
displayed correctly, it may be that the TV
system is set incorrectly for your country or
region.
1 Switch the receiver into standby.
2 While holding down ENTER on the front
panel, press  STANDBY/ON.
The display shows RESET  NO .
Use TUNE +/– (or / on the remote control)
to select PAL/NTSC  PAL , and then use
PRESET +/– (or
/ on the remote control) to
select PAL or NTSC.
Changing the frequency step
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region. Here’s how to
switch the setting:
1 Switch the receiver into standby.
2 While holding down ENTER on the front
panel, press  STANDBY/ON.
The display shows RESET  NO .
Use TUNE +/– (or / on the remote control)
to select FREQ STEP  9k , and then use
PRESET +/– (or / on the remote control) to
select 9k or 10k.
Changing the OSD display
language (OSD Language)
The language used on the Graphical User
Interface screen can be changed.
• The explanations in these operating
instructions are for when English is
selected for the GUI screen.
1 Press on the remote control,
then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use
/// and
ENTER to navigate through the screens and
select menu items. Press RETURN to exit the
current menu.
RECEIVER
VSX-1019_DF.book 36 ページ ２００９年３月１３日 金曜日 午前９時５８分