Configure hostname, snmp and remote logging, Configure snmp, Configure hostname, snmp and remote logging –22 – Polycom V2IU 4350 User Manual
Page 40: Configure snmp –22
Advertising
User Manual V
2
IU 4350 Converged Network Appliance
3 - 22
Configure Hostname, SNMP and Remote Logging
The 4350 can be managed remotely by an SNMP network management system
such as HP Openview. The 4350 supports SNMPv1 or SNMPv3 and MIB-II
(RFC1213). All MIB-II variables are read only. The MIB variables sysContact
and sysLocation are set by the web GUI.
Messages generated by the 4350 can be sent to a remote log server.
The configuration screen is reached through the Configuration Menu:
1.
Select System.
2.
Select System Overview.
3.
Select Services Configuration.
Configure SNMP
1.
Select the Enable SNMP v1 or v3 checkbox. If using SNMPv1 enter the
Read-Only Community. If using SNMPv3 enter the User Name,
Passphrase and Security method.
Advertising