Planet Technology VIP-154T - Manual (Page 53)

53
Case 9: Auto Answer Feature_PSTN to IP
In this example, there are one VIP-154NT and two VIP-154T and connect with Peer to Peer mode. The
VIP-154NT_A had set Auto Answer function for forwarding to arbitrary telephone. If there have
incoming PSTN calls and VIP-154NT_A doesn’t answer the incoming calls after specific time, the caller
will hear prompt sounds to input the password and then dial out an arbitary IP telephone.
Machine configuration on the VIP-154NT:
STEP 1:
Please log in VIP-154NT_A via web browser, browse to the Phone Settings menu and
select the Auto Answer config menu. In the setting page, please enable the Auto Answer
and PIN Code Enabled function, and then the sample configuration screen is shown below:
STEP 2:
Please log in VIP-154NT_A via web browser, browse to the Phone Book menu and select
the Speed Dial Settings config menu. In the setting page, please add a speed dial number
for dial to IP address 192.168.0.2 (VIP-154T_B), and then the sample configuration screen
is shown below: