Polycom IPOWER 70 - Manual (Page 5)

Unpacking the Box
5
Unpacking the
Box To remove the camera from the box:
1. With two hands, grasp the outside edges of the packing material
and gently lift the unit from the box.
2. Carefully remove the camera from the packing material and place
it on a flat surface.
Caution
When lifting the iPower 70 camera, always lift the unit by its
base. Never lift the camera by its head.
Note: Before you continue with the installation of the camera,
please read the next section, “Important Note About
Moving the Camera.”