Connecting the camera cable, Ba c – Polycom IPOWER 70 User Manual
Page 8
Advertising
INSTALLING THE IPOWER 70 ROOM CAMERA
8
Connecting the
Camera Cable
Caution
Whenever you plug a cable into this camera, hold the
camera by its base, not by the camera head.
To connect the camera cable:
1. Plug the 8-pin camera cable
(labeled with the
icon on both
cable collars) into the 8-pin camera connector
on the back of
the camera.
2. Locate the desired camera connector (labeled with the
icon) on
the back of the collaboration system computer box or electronics
module
. (Choose
for main camera or
for auxiliary
camera.)
3. Plug the other end of the camera cable into the desired camera
connector
.
a
8
b
8
c
A
c
8
8
b
a
c
Advertising