Setting up, Screen size and throw distance, Nglish - 16 – Panasonic PT-F100E User Manual

Page 16: Jcalculation methods for screen dimensions, Getting started

Advertising
background image

Getting Started

E

NGLISH - 16

Setting up

You can adjust the projection size with 2.0x zoom lens. Calculate and define the throw distance as follows.

* All measurements above are approximate and may differ slightly from the actual measurements.

J

Calculation methods for screen dimensions

You can calculate more detailed screen dimension from the screen diagonal.

SW (m) = SD (") x 0.0203

SH (m) = SD (") x 0.0152

LW (m) = 0.0304 x SD (") - 0.048

LT (m) = 0.0606 x SD (") - 0.057

* The results above are approximate and may differ slightly from the actual measurements.

Screen size and throw distance

Projection size (4 : 3)

Throw distance (L)

Screen diagonal

(SD)

Screen height (SH)

Screen width (SW)

Minimum distance

(LW)

Maximum distance

(LT)

33" (0.84 m)

0.50 m

(1'7")

0.67 m

(2'2")

1.9 m

(6'2")

40" (1.02 m)

0.61 m

(2')

0.81 m

(2'7")

1.2 m

(3'11")

2.4 m

(7'10")

50" (1.27 m)

0.76 m

(2'5")

1.02 m

(3'4")

1.5 m

(4'11")

3.0 m

(9'10")

60" (1.52 m)

0.91 m

(2'11")

1.22 m

(4')

1.8 m

(5'10")

3.6 m

(11'9")

70" (1.78 m)

1.07 m

(3'06")

1.42 m

(4'7")

2.1 m

(6'10")

4.2 m

(13'9")

80" (2.03 m)

1.22 m

(4')

1.63 m

(5'4")

2.4 m

(7'10")

4.8 m

(15'8")

90" (2.29 m)

1.37 m

(4'5")

1.83 m

(6')

2.7 m

(8'10")

5.4 m

(17'8")

100" (2.54 m)

1.52 m

(4'11")

2.03 m

(6'7")

3.0 m

(9'10")

6.0 m

(19'8")

120" (3.05 m)

1.83 m

(6')

2.44 m

(8')

3.6 m

(11'9")

7.2 m

(23'7")

150" (3.81 m)

2.29 m

(7'6")

3.05 m

(10')

4.5 m

(14'9")

9.0 m

(29'6")

200" (5.08 m)

3.05 m

(10')

4.06 m

(13'3")

6.0 m

(19'8")

12.1 m

(39'8")

250" (6.35 m)

3.81 m

(12'6")

5.08 m

(16'8")

7.6 m (24'11")

15.1 m

(49'6")

300" (7.62 m)

4.57 m (14'11")

6.10 m

(20')

9.1 m (29'10")

18.1 m

(59'4")

NOTE:

See “Screen size and throw distance for 16:9 aspect ratio” on page 52.
• Do not use the projector at a raised or a horizontally tilted position as it may cause

malfunction of the projector.

• Make sure the projector lens surface is parallel with the screen. You can tilt the projector

body approximately ± 30° vertically. Overtilting may result in shortening the component’s
life.

• For the best quality of the projection image, install a screen where sun light or room light does not shine directly onto the

screen. Close window shades or curtains to block the lights.

SD

SW

SH

Screen

Projected image

Advertising