Panasonic PT-F100E - Manual (Page 35)

POSITION menu
E
NGLISH - 35
Settings
Q 16:9
The squeezed signal will be projected in 16:9 ratio.
Q S4:3
The input signal will be sized down 75 % and
projected. S4:3 mode is effective when projecting
4:3 image on to a 16:9 screen.
Q AUTO
The S1 signal which contains an identifying signal
will be detected and automatically project the
image in proper ratio.
When the input signal resolution is lower than the
projector resolution, it will be projected at the projector
resolution. You can deactivate the RESIZING and
project the lower resolution input signal at its original
resolution. Press I H to select the required setting.
ON Active
OFF Deactive
If the projected image is degraded, you can activate
FRAME LOCK for synchronisation. Press I H to select
the required option.
OFF Deactive
ON Active
NOTE:
• If you project an image with an unmatched aspect ratio,
the image may distort or some portions may be
cropped. Select an aspect ratio which preserves the
intention of the image creator.
• The order of ASPECT types is defined not only by the
input method but also by the input signals. See “List of
compatible signals” on page 46.
• If you project a copyrighted image enlarged or distorted
by using ASPECT function in commercial use in a
public place, such as a restaurant or hotel, you might
infringe on the copyright of the creator which is
protected by copyright law.
RESIZING
NOTE:
• Usually the recommended setting is ON.
• When the RESIZING is set to ON, the lower resolution
input signal may be projected in less quality.
When the RESIZING is set to OFF;
• The size of the image will be projected smaller and you
may need to adjust ZOOM and FOCUS, or the
projector position backwards and forwards.
• DIGITAL ZOOM, KEYSTONE and INDEX-WINDOW
are not available.
FRAME LOCK
NOTE:
• This function is available with COMPUTER signals only.