Paradyne CSU - Manual (Page 372)

B. SNMP MIBs and Traps, and RMON Alarm Defaults
B-24 September 2002 9128-A2-GB20-80
Table B-13. Static DLCI Alarm Defaults – NetScout Area
Item
Sample
Type
1
MIB/Tag/OID
2
Interval
Event
Type
Rising
Threshold
Default Falling
Threshold
Default
Current Latency A MIB: pdn_FrExt.mib (E)
Tag: devFrExtLatencyLatest
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.3.1.7.I.D
60 secs
(1 min) None Must be
configured. 0
Average Latency A MIB: pdn_FrExt.mib (E)
Tag: devFrExtLatencyAvg
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.3.1.5.I.D
900 secs
(15 mins) None Must be
configured. 0
Frames Received D MIB: FR DTE MIB (RFC 2115)
Tag: frCircuitReceivedFrames
OID:
.1.3.6.1.2.1.10.32.2.1.8.I.D
60 secs
(1 min) None Must be
configured. 0
Frames Sent D MIB: FR DTE MIB (RFC 2115)
Tag: frCircuitSentFrames
OID:
.1.3.6.1.2.1.10.32.2.1.6.I.D
60 secs
(1 min) None Must be
configured. 0
Tx Frames
Exceeding CIR D MIB: pdn_FrExt.mib (E)
Tag: devFrExtDlciTxFrOutCIR
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.1.1.17.I.D
60 secs
(1 min) None Must be
configured. 0
Tx CIR Utilization D MIB: FR DTE MIB (RFC 2115)
Tag: frCircuitSentOctets
OID:
.1.3.6.1.2.1.10.32.2.1.7.I.D
60 secs
(1 min) None Must be
configured. 0
1
D = Delta. Indicates that the calculated difference between the current value and the previous value is
contained in the MIB.
A = Absolute. Indicates that the exact value for the item is contained in the MIB.
2
I in the OID = Interface ID of the frame relay link.
D = DLCI number.