Paradyne CSU - Manual (Page 103)

4. Configuration Options
9128-A2-GB20-80 September 2002 4-59
Assigning a Synchronous Data Port to Network or DSX-1 Time Slots
For a FrameSaver SLV 9128-II, which has two data ports, another assignment
screen is available. Use the Sync Data Port Assignment screen to view the status
of:
T All DS0 assignments on the Network interface
T All DS0 assignments on the DSX-1 interface
Then, you can a assign synchronous data port to:
T Network interface time slots
T DSX-1 interface time slots
Synchronous Data Port Assignment Screen Example
Value Meaning
Assign To Specifies either Net1 (network) or DSX1-1 (DSX-1) time slots.
N tt
D tt
This field represents time slot tt of the network interface.
This field represents time slot tt of the DSX-1 interface.
Assigned The time slot is already assigned to a network or DSX-1 time slot.
Assigned time slots cannot be modified from this screen.
Available The time slot is currently unassigned.
Port-2 For a FrameSaver SLV 9128-II, synchronous data Port-2 is assigned
to the time slot.
main/config/tslot_assign/sync_data/net 9128-II
Device Name: Node A 5/26/2000 23:32
SYNC DATA PORT ASSIGNMENT
Assign To: Net1
N01 N02 N03 N04 N05 N06 N07 N08
Assigned Assigned Assigned Assigned Assigned Port-2 Port-1 Assigned
N09 N10 N11 N12 N13 N14 N15 N16
Assigned Assigned Assigned Assigned Assigned Port-2 Port-1 Available
N17 N18 N19 N20 N21 N22 N23 N24
Available Available Available Available Available Available Available Available
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save ClearAll DSXAssign FrAssign