Python 1090 - Manual (Page 29)

 © 2006 directed electronics—all rights reserved
➜
disarming
Press the
�������
buttonoftheremotecontrolfor1secondtodisarmthe
alarm��
“ system ”Thesirenwillchirptwice,thelightswillflashtwice,the
doorswillunlockifconnected,andtheledwillstopflashing��
“
remote ”TheremotecontrolNotificationwillbetwobeeps,play
thedisarmanimationandthendisplaythestatusicons��
Note: InValetmode,whenunlockingthedoors,theremote
controlNotificationwillbethedisarmanimation
Note: Ifmorethan2chirpsareheard,thesystemmayhave
beentriggeredwhilearmedand/orNPCactivated��Please
refertoDisarmDiagnosticssectionofthisguide��
➜
high security disarm
High security disarm will silence the siren and reset the alarm to the
armed state if the remote control
�������
button is pressed more than six
seconds after the alarm is triggered. To disarm the alarm, the button
must be pressed again.
If pressed within six seconds of a trigger, the alarm will disarm as a
convenience in case of accidental triggers by the user.
high Security Disarm response
“ system ” The siren will stop sounding, the lights will stop flashing
and the alarm will remain armed.
“
remote ” There is no remote control Notification for High
Security disarms.