Python 1090 - Manual (Page 50)

 © 2006 directed electronics—all rights reserved
when it will not be used for long periods of time. It will not respond
to any RF signals or function button presses when asleep.
1. Enter programming mode
2. Scroll to highlight the OFF icon
3. Press the
button to choose and access the POWER
screen, CONFIRM is highlighted.
4. Press the button to enter sleep mode or highlight exit
and press the button to return to the main menu.
5. Press the
�������
button anytime to exit programming.
➜
wake up the remote control
To wake up the remote control press and hold the program button
about 3 seconds or until a beep is heard. The display will play the
introduction animation and enter normal operation mode.
➜
set the 12 hour clock
1. Enter programming mode
2. Scroll to highlight the Clock icon
3. Press
to choose the Clock and access Clock set screen
4. Scroll and highlight a digit or A/P and press to change
the digit.
5. Press
�������
anytime to save the new setting and exit.