Polycom Audio and Video - Manual (Page 16)

Administrator’s Guide for the V500 System
2 - 2 www.polycom.com/videodocumentation
Positioning the System
The V500 system is designed for homes, home offices, and small- to medium-sized
businesses.
To position the system:
>> Place the V500 system on top of your TV monitor. For optimal audio and video
performance, locate the monitor within 5 to 10 feet (1.52 to 3.05 meters) away
from the people in the call.
Connecting the Monitor
You must connect a television monitor to the V500 system. This may be an NTSC
or PAL monitor, depending on your system.
To connect a monitor to the system:
1. Connect the monitor to the S-video or composite video outputs on the back of
the V500 system.
You must use the same type of connector on the monitor as on the system. For
example, if you use the S-video connector on the monitor, use the S-video
connector on the system.
5'-10'
1.
DC IN 12V
LAN BRI
S-video output
Composite video output
(preferred)