Panasonic PT-L702SDE - Manual (Page 26)

26
Saving imported images onto the SD
memory card
Once the images have been im-
ported and sorted, you then need to
save them onto the SD memory
card.
# # # # # Use the PC card adapter to
insert the SD memory card into
the computer. (Refer to page
14 .)
Check that the write-protect
switch on the SD memory card is
not at the LOCK position.
$ $ $ $ $ Click Save to SD memory card.
%
% % % % Select the destination drive
and directory in the Save into
SD Memory Card window.
The Save into drive list box
shows all of the drives which can
be used by the computer. Fur-
thermore, you can use the
direction keys ( ) next to the
destination directory number to
select the desired directory
number. (The directory number
will be set automatically to an
unused number.) Furthermore,
you can also use the numeric
keys to enter a directory number
directly, but be sure to enter a
number between 100 and 999.
Note:
B If you are not sure of the designa-
tion for the destination drive (the
SD memory card drive), refer to
page
15 for instructions on how to
check.
& & & & & Click OK to save the image.
If the specified directory number
is already in use, a confirmation
window will appear. If you click
No, the save operation will be
cancelled, and you can then enter
a new directory number.
If you click Yes, the Over write to
destination dialog box will appear.
Select one of the following
operations.
Over write
The existing file will be deleted and
the new file will be saved in its place.
No
The file will not be saved, and the
operation will skip to the next file.
Subsequent
The next-largest file number for that
directory will be used in saving the
file.
Over write all
The same operation as Over write
will be carried out for all remaining
files.
Stop
Saving of files will be cancelled and
the main application window will
reappear.