Pioneer DVR-233-S - Manual (Page 38)

Recording 06
38
En
2 Press ì REC repeatedly to extend recording in 30
minute increments.
Programming a new end time
1 During timer recording, press TIMER REC to
display the Timer Recording screen.
You can also access the Timer Recording screen from
the Home Menu (press
HOME MENU , select Timer
Recording , then Timer Rec (View) ).
2 Use the button to highlight the current timer
recording, then press ENTER.
A screen showing details of the timer recording appears.
From this screen, only the recording stop time can be
changed.
3 Set a new Stop time for the timer recording.
Use the
/
buttons to select the hour or minute field,
then use the
/
buttons to change the time.
4 Press ENTER to set the new time and exit the
screen.
Recording will continue until the new stop time is
reached.
Canceling and stopping a timer recording in
progress
After a timer recording has started, you can cancel the
program (but continue recording), or stop recording
completely if you need to.
1 During timer recording, press and hold ì REC for
three seconds.
Only the program is canceled (the timer indicator
disappears); recording continues so that you can
manually stop recording whenever you like.
2 When you want to stop recording completely,
press .
Preventing use of the recorder before a
timer recording (child lock)
You can make all the front panel and remote control
buttons inoperative using the child lock feature. This is
useful when you set a timer recording and want to make
sure that the timer settings are not changed before
recording has finished.
1 If the recorder is on, switch it into standby.
2 Press and hold on the front panel for three
seconds to lock the controls.
The front panel display briefly shows LOCK . If any buttons
are pressed on the remote or front panel, LOCK is briefly
displayed again.
• To unlock the recorder, press and hold on the front
panel for three seconds until the display shows
UNLOCK .
• To cancel a timer recording when the recorder is
locked, first unlock the recorder (see above), then
press and hold
ì REC for three seconds.
Timer recording FAQ
Frequently Asked Questions
• Even though the timer is set, the recorder d oesn’t start
recording!
Check that the disc loaded is recordable, not locked
(see
Lock Disc on page 49), and that there are fewer
than 99 titles already on the DVD.
• The recorder won’t let me enter a timer program! Why
not?
You can’t enter a timer program if the clock isn’t set.
Date
Remain 01h00m(XP)
Start
12/12 SUN 7:00 AM
Timer Rec (View)
Stop
1/1
CH
08:00 AM SP 002
Rec Mode
New Input
Timer Rec (View)
Date Start
: AM AM 12/12 SUN 07 00
Stop CH
: 00 002
RecMode
SP
Program Set
08
ì REC
DVR-230_KU.book Page 38 Thursday, January 27, 2005 2:42 PM