Pioneer DVR-233-S - Manual (Page 50)

The Initial Setup menu 08
50
En
Important
If you switch to Progressive when using a TV that is not
compatible with progressive-scan video, you will not be
able to see anything displayed on your TV. If this happens,
press and hold the
+ button on the front panel, then press
STANDBY/ON . This will set the recorder’s video
output back to Interlace .
Input Adjust
Use this setting to adjust the brightness/color separation
of the video input.
From the Input Adjust screen, use the / buttons to
adjust the 3-D Y/C setting from Off to Max .
Press ENTER to confirm and exit the screen.
Playback Adjust
Use the various Playback Adjust settings to adjust the
picture quality of the video output.
From the Playback Adjust screen, use the / buttons
to select a setting, then use the / buttons to adjust
it.
• Pure Cinema – This setting optimizes the picture for
film material when the video output is set to
progressive scan. Usually it is best set to
On , but try
switching it Off if the picture appears unnatural.
• Block NR – Adjusts the amount of noise reduction
applied to the block noise (artifacts visible in areas of
flat color, caused by MPEG compression).
• Mosquito NR – Adjusts the amount of noise
reduction applied to the mosquito noise (artifacts
visible around the edge of an image, caused by
MPEG compression).
• Black Level – Adjusts the intensity of black.
• Chroma Level – Adjusts how rich colors appear.
Press ENTER to exit the screen.
Audio settings
Audio Adjust setting
Use the Audio Adjust setting to adjust the dynamic range
of the audio output when playing DVDs with Dolby Digital
sound.
Compatibility of this unit with progressive-scan TVs
Consumers should note that not all high-definition television sets
are fully compatible with this product and may cause artifacts to
be displayed in the picture. In case of 525 progressive scan
picture problems, it is recommended that the user switch the
connection to the ‘standard definition’ output (Interlace). If there
are questions regarding our TV set compatibility with this model,
please contact our customer service center.
This recorder is compatible with the following Pioneer displays
and monitors
Plasma display
• PDP-505HD, PDP-502MX, PDP-5030HD, PDP-4330HD, Pro-
1000HD, Pro-800HD, PDP-5031, PDP-4300, Pro-1000HDI, Pro-
800HDI, PDP-5040HD, PDP-4340HD, Pro-1110HD, Pro-910HD,
Pro-810HD, Pro-1010HD, Pro-920HD, Pro-1120HD, PDP-4345HD,
PDP-5045HD, PDP-4350HD, PDP-5050HD, PDP-4304, PDP-5004,
PDP-4300
Projection monitor receiver
• Pro-700HD, Pro-710HD, Pro-610HD, Pro-510HD, Pro-720HD,
Pro-620HD, Pro-520HD, SD-641HD5, SD-582HD5, SD-532HD5,
SD-533HD5, SD-643HD5, Pro-730HD, Pro-630HD, Pro-530HD,
Pro-730HDI, Pro-530HDI, Pro-730HD, Pro-630HD, Pro-530HD
Basic
Disc
Video
Audio
Recording
Playback
Video Out
Input Adjust
Playback Adjust
Video
Input Adjust
3-D Y/C Off Max
Basic
Disc
Video
Audio
Recording
Playback
Video Out
Input Adjust
Playback Adjust
Video
Basic
Disc
Video
Audio
Recording
Playback
Video Out
Input Adjust
Playback Adjust
Pure Cinema
Block NR
Mosquito NR
Black Level
Chroma Level
Video
Playback Adjust
Off On
Off Max
Off Max
Min Max
Min Max
Pure Cinema
Block NR
Mosquito NR
Black Level
Chroma Level
Basic
Disc
Video
Audio
Recording
Playback
Audio
Audio Adjust
Audio In
Audio Out
DVR-230_KU.book Page 50 Thursday, January 27, 2005 2:42 PM