Screenlogic, Video & lighting protocol adapter kit contents, Kit contents – Pentair ScreenLogic BL-C111A User Manual

Page 2: Screenlogic video & lighting protocol adapter, Technical support

Advertising
background image

ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide

ScreenLogic

®

Video & Lighting Protocol Adapter kit contents

The following items are included in the kit.

Kit contents

ScreenLogic Video & Lighting Protocol Adapter (

P/N 520854Z)

AC/DC power adapter

RJ45 cable

DB9M to RJ45 adapter

User’s and Installation Guide (this manual)

© 2008 Pentair Water Pool and Spa, Inc. All rights reserved.
1620 Hawkins Ave., Sanford, NC 27330 • (919) 566-8000
10951 West Los Angeles Ave., Moorpark, CA 93021 • (800) 553-5000

IntelliTouch

®

, ScreenLogic

®

and Pentair Water Pool and Spa

®

are registered trademarks of Pentair Water Pool

and Spa, Inc. and/or its affiliated companies in the United States and/or other countries. Unless noted, names
and brands of others that may be used in this document are not used to indicate an affiliation or endorsement
between the proprietors of these names and brands and Pentair Water Pool and Spa, Inc. Those names and
brands may be the trademarks or registered trademarks of those parties or others.
P/N 520936 - Rev A - 03/03/2008

i

FCC Regulatory Safety Notice - This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Modifications not expressly approved by the party responsible for FCC compliance could
void the user’s authority to operate the equipment.

Related manuals - Download the IntelliTouch ScreenLogic User’s Guide
(P/N 520493) at:
http://www.pentairpool.com/siteimages/ScreenLogic_Users_Guide.pdf

Technical Support

Sanford, North Carolina (8 A.M. to 5 P.M. ET)
Moorpark, California (8 A.M. to 5 P.M. PT)
Phone: (800) 831-7133 - Fax: (800) 284-4151

IC Regulatory Notice
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.

Advertising