Pentair ScreenLogic BL-C111A - Manual (Page 6)

ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide
4
Installing the ScreenLogic Video & Lighting protocol adapter
Note: If an existing ScreenLogic system is not present, please install the
standard ScreenLogic system first as described in the User’s Guide provided
with ScreenLogic. Once installed, please follow the directions below.
Follow the two step process to install the ScreenLogic Video & Lighting
protocol adapter:
Step 1: Updating the small protocol adapter - Note: This step is not
required for a brand new ScreenLogic system. Please proceed to STEP 2
below.
1.
Attach your protocol adapter to the wireless router port 1, 2, 3, or 4.
2. Make sure that the Video & Lighting protocol adapter is NOT plugged in
during this process.
4. Run pentairupdate.exe on the installation CD.
5. The following program dialog will appear with the small protocol
adapter listed.
5. Click on the Pentair Brick (192.168.2.2:80) and click Start.
The update program will convert your small protocol adapter for use
with the new Video & Lighting protocol adapter.
Click on the
Pentair Brick
(192.168.2.2:80)
Start
Before installing the ScreenLogic software, make sure that you are running the
latest version. The latest software version for ScreenLogic can be obtained from
the Pentair website at:
http://www.pentairpool.com/techinfo/instructions.htm