Paradyne U8777 - Manual (Page 7)

8700-A2-GB20-40 May 2002 v
About This Guide
Document Purpose and Intended Audience
This guide contains information needed to set up, configure, and operate Hotwire
8777 and 8779 Time Division Multiplexer Symmetric Digital Subscriber Line
(TDM SDSL) Termination Units, and is intended for installers and operators.
New Features for this Release
This version of the Hotwire TDM SDSL Termination Units, Models 8777 and 8779,
User’s Guide adds the inband management feature for the Model 8779
Termination Unit.
Document Summary
Section Description
Chapter 1, About Hotwire 8777
and 8779 TDM SDSL Units
Describes the Hotwire Termination Unit’s features
and capabilities.
Chapter 2, Using the
Asynchronous Terminal Interface
Provides instructions for accessing the user interface
and navigating the screens.
Chapter 3, Initial Startup and
Configuration
Provides procedures for setting up the user interface
and configuring the unit.
Chapter 4, Cross-Connecting
Ports
Provides instructions for cross-connecting the time
slots of the DSL and DTE ports.
Chapter 5, IP Addressing Provides IP addressing requirements and examples.
Chapter 6, Security Presents procedures for creating a login, setting the
effective access levels, and controlling SNMP
access.
Chapter 7, Monitoring and
Troubleshooting
Describes using the LEDs, status messages, and
network statistics to monitor the unit and diagnose
problems.
Chapter 8, Testing Provides instructions for running network, DSX-1,
and G.703 tests.