Pro-tec Automobile Alarm - Manual (Page 10)

Using Your System
ARMING
You can turn on, or arm, the system by pressing
button #1 of your transmitter. When the system is
armed, you will see the running lights flash once.
DISARMING
1.
If siren is not sounding
Press button #1 once.
Running lights will flash at least twice.
Trailer is now disarmed and safe to enter.
2. If siren is sounding
Press button #1 once.
This will silence the siren and
stop the running lights flashing.
Note. Trailer alarm is still armed.
Press button #1 again, this will flash
the running lights at least two times.
Trailer is now disarmed and safe to enter.