Pro-tec Automobile Alarm - Manual (Page 3)

What It Does
The Pro-Tec System One is designed to monitor
and protect your trailer and its contents while at
a race, rest stop, hotel, restaurant, etc. This is
accomplished by door switches and a shock
sensor. Any movement of the trailer or opening
of a door will trigger the alarm. This will cause
the electrical brakes of the trailer to be applied,
running lights will then flash, and the siren will
sound. If you have the optional pager system,
the pager will be notified up to one mile away,
thus alerting you of a potential problem.
This device complies with part 12 of FCC rules.
Operation is subject to the following conditions:
1.
This device may not cause harmful inter-
ference, and
2. This device must accept any interference
received, including interference that may
cause undesired operation.
The system requires no specific maintenance.
Your remote control is powered by a miniature
12 v. battery, type GP23A, that will last about
a year under normal use. When the battery
weakens, operating range will be reduced and
the LED on the remote light will dim.
This Owner’s Guide should help you get the
most out of your system. Please take the time
to read it thoroughly, prior to using the system.