Peg-Perego PRIMO VIAGGIO SIP ES 30.30 User Manual
Page 25
25
Installing the Car Seat without the Base
Important! The base is designed to
avoid consumer misuse by reducing
the number of times the seat must be
anchored to your vehicle. Please, use
and install Primo Viaggio Sip ES 30•30
without the base only if needed.
Park the vehicle on level ground.
1• Position the restraint on the seat,
so your baby is facing the rear of
the vehicle. Adjust the handle so it
rests at the top edge of the car seat
as shown. Any other position may
injure your baby in an accident. To
move the handle, press the gray
buttons on the sides of the handle at
the same time and push the handle.
Important! The seat must be parallel
to the ground. If necessary, use rolled
towels or pool noodles under the seat
at vehicle seat crease, so the red line on
the side of the seat is parallel with the
ground.
PrimoViaggioSIP-ES_USA_30-30_FIU25 25
10-03-2010 14:44:57