Peg-Perego PRIMO VIAGGIO SIP ES 30.30 User Manual
Page 40
⇠
40
This unit is certified for aircraft use.
1• Buckle the base to the aircraft seat using
the lap belt as shown. A secondary belt
path can also be used as shown in Fig. B.
2• Position the base rear facing in the
aircraft seat. Check the level indicator
on the side of the base to make sure
that the ball is in the green area. If it is
not, turn the knob left or right until it
is in the correct position.
3• Thread the lap belt through the slots
on the base and lock the latch plate
into the buckle.
4• Pull the seat belt strap to tighten the base
down. Press your body weight down on
the seat to tighten the belt further. Check
the level and adjust if needed. Push and
pull on the base. If you can move it more
than one inch, tighten the belt further.
Position the car seat rear facing over the
base. Press the seat into the base until
you hear the click. Make sure the seat is
correctly locked in place.
How to Use the Car Seat on Aircraft with Base
PrimoViaggioSIP-ES_USA_30-30_FIU40 40
10-03-2010 14:45:07