Paradyne 6350-A4 - Manual (Page 7)

7
5. Insert the supplied power cord’s round end into the jack labeled POWER. Plug the
transformer into an AC outlet.
The ReachDSL modem hardware installation is now complete. When the power cord is
installed, the ReachDSL modem goes through a power-on self-test.
Power-On
When power is applied, the ReachDSL modem performs self-diagnostics and the PWR
LED is on. The self-diagnostics includes a power-on self-test and all of the LEDs turn on
for one second.
PHONE LINE
ETHERNET
POWER
01-17010
Power
Jack
Transformer
or
ReachDSL
TST LINE ETHERNET ALM PWR TX/RX
01-17003
Power – green
Alarm – red
Test – yellow
Transmit/Receive – green
Ethernet Link – green
DSL Line – green