Patriot Products PTX-NP550 - Manual (Page 10)

10
External
Toothed
Washer
Grounding
Grounding Antenna Feed Cables
1. Ground antenna feed cables in
accordance with current National
Electric code and local electric
codes. The illustration shows a
typical grounding method.
Clamps that provide a solid
connection between ground wire
and a ground source should be
used.
Grounding Non-Penetrating
Mount Frame
1. Ground the Non-Penetrating
mount frame. The illustration
shows a typical grounding
method.
Refer to the NEC Section 810
and local electric codes for
specific instructions on grounding
the remaining end of the ground
wire.
Coaxial
Cable
(to LNB)
Ground Block
NEC Section 810
Ground Wire
NEC Section 810
Non-Pen
Frame
Ground
Lug
1/4” Tapping
Bolt
Ground Wire
Coaxial
Cable
(to Re-
ceiver)