Patriot Products PTX-NP550 - Manual (Page 7)

7
4) Attach the CHANNEL LEG
(prt# 295003) to the PIPE
ASSEMBLY as pictured.
Tighten all hardware at
this time.
2) Attach the NP CORNER TIE
BRACKET (prt# 295001)
and NP CORNER TIE
BRACKET-UNBENT
(prt#295005) to the ANGLE
TRAY ANGLE ASSEMBLIES
as pictured to the left.
DO NOT tighten hardware at
this time.
DUAL TRAY
ASSEMBLY
1) Lay out 16 NP TRAY ANGLE
ASSEMBLIES (prt# 295000),
4 NP CORNER TIE BRACKETS
(prt#295001), 4 NP FOOT
ASSEMBLIES (prt# 295002) and
4 NP CORNER TIE BRACKET
UNBENT (prt#295005) as pictured
to the left.
3/4”nc X 2”
Bolt, Washer, & Nut
DETAIL B
SCALE 1 : 6
Foot Assembly
(prt# 295002)
Channel Leg
(prt# 295003)
3/8”nc X 1-3/4”
Bolt, Washer, & Nut
3/4”nc X 2”
Bolt, Washer, & Nut
DETAIL A
SCALE 1 : 6
NP Tray Angle
Assemblies
(prt# 295000)
NP Corner Tie
Bracket
(prt# 295001)
3/8”nc X 1-3/4”
Bolt, Washer, & Nut
NP Corner Tie
Bracket Unbent
(prt# 295005)
3) Attach the CHANNEL LEG
(prt# 295003) to the NP
FOOT ASSEMBLY (prt#
295002) then the NP FOOT
ASSEMBLY to the NP
TRAY ANGLE ASSEMBLIES
(prt# 295000) as pictured.
DO NOT tighten hardware at
this time.