Panasonic NV-FJ620 - Manual (Page 10)

10
M
1
Y
2005
D
1 H:M
0:00
CLOCK SET
START:MENU
MENU
SELECT
END : , OK
:MENU
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
MENU
SELECT
END : , OK
:MENU
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
Setting the Clock of Your VCR
The clock will operate for at least 3 years in total after it has
been set, - in the event of a power failure, it will operate on its
backup system. After 3 years, it will only operate for 1 hour
on its backup system.
Preparations
– Confirm that the TV is on and the VCR viewing channel is
selected.
– Turn on the VCR.
Example:
Date; 16 October, 2005
Time; 20:15
Operations
1 Press the MENU button U to
display the Main menu on the TV
screen.
2 Press the Cursor buttons (34) S
to select [CLOCK SET] then press
the OK button T.
3 Set each item by pressing the
Cursor buttons (341) S. Press
the Cursor button (2) S to return to
the previous item.
At the set time (H:M) point:
– When it is kept pressed, the
indication changes in 30 minute
steps.
– There is no need to press the
Cursor button (1) S.
4 Press the MENU button U.
– The clock starts.
Time Reset Function
If the clock is less than two minutes slow or fast, it can easily
be reset to the proper time.
Example:
Resetting the clock to 12:00.00
1 Press the MENU button U to display the Main menu on
the TV screen.
2 Press the Cursor buttons (34) S to select [CLOCK SET]
then press the OK button T.
3 When the current clock display on the VCR is between
11:58.00 and 12:01.59, press the MENU button U as
soon as you hear the 12:00.00 signal. This resets the
time to 12:00.00.
On Screen Display