Panasonic DMC-FZ18 - Manual (Page 105)

Advanced (Playback)
105
VQT1F83
w Single setting
1 Press / to select the picture
and then press
 to SET/
CANCEL.
2 Press [MENU/SET] twice to close
the menu.
w Multi setting/To cancel all settings
Perform the same operation as in
“[DPOF PRINT]”. (P103 to 104)
• If you press [MENU/SET] while canceling
protection, the canceling will stop halfway.
• The protect setting may not be effective
on other equipment.
• If you want to delete protected pictures,
cancel their protection.
• Even if you protect pictures in the built-in
memory or a card, they will be deleted if
the built-in memory or the card is
formatted.
• Even if you do not protect pictures on an
SD Memory Card or an SDHC Memory
Card, they cannot be deleted when the
card’s Write-Protect switch
is set to
[LOCK].
• The following functions cannot be used
with protected pictures.
– [ROTATE]
– [AUDIO DUB.]
– [TITLE EDIT]
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P93)
You can add the audio after taking a
picture.
1 Press / to select the picture
and then press
 to start audio
recording.
• The message [OVERWRITE AUDIO
DATA?] screen appears when audio has
already been recorded. Press
 to
select [YES] and then press [MENU/
SET] to start audio recording. (The
original audio is overwritten.)
• Audio dubbing cannot be used with the
following pictures.
– Motion pictures
– Protected pictures
– Pictures recorded when the quality is
set to [RAW] or [RAW
KJPEG]
2 Press  to stop recording.
• The audio recording stops
automatically if
 is not pressed after
about 10 seconds.
3 Press [MENU/SET] twice to close
the menu.
[SET]
The protect icon [ ]
appears.
[CANCEL]
The protect icon [ ]
disappears.
2
[AUDIO DUB.]
Adding audio after taking pictures
MENU
SET