Panasonic DMC-FZ18 - Manual (Page 116)

Connecting to other equipment
116
VQT1F83
_ These items cannot be displayed when
the printer does not support the paper
sizes.
• [PAGE LAYOUT]
(Layouts for printing that can be set with
this unit)
• An item cannot be selected if the printer
does not support the page layout.
w Setting the date printing with the
DPOF print in advance
We recommend setting DPOF date printing
with [DPOF PRINT] (P104) in advance
when the printer supports it. If you select
[DPOF PICTURE], printing starts and the
recording date is printed.
w Layout printing
• When printing a picture several times
on 1 sheet of paper
For example, if you want to print the same
picture 4 times on 1 sheet of paper, set
[PAGE LAYOUT] to [
] and then set
[NUM. OF PRINTS] to 4 for the picture
that you want to print.
• When printing different pictures on
1 sheet of paper
For example, if you want to print 4 different
pictures on 1 sheet of paper, set
[PAGE LAYOUT] to [
] and then set
[COUNT] in [DPOF PRINT] (P103) to 1 for
each of the 4 pictures.
• Do not disconnect the USB connection
cable when the cable disconnection
warning icon [
] is displayed.
(Depending on the printer, the icon may
not be displayed.)
• If the remaining battery power becomes
low while the camera and the printer are
connected, the alarm beeps. If this
happens during printing, press [MENU/
SET] and stop printing at once. If not
printing, disconnect the USB connection
cable.
• The camera is receiving an error message
from the printer when the [
q] indication
lights orange during printing. After
finishing printing, make sure there are no
problems with the printer.
• If the total number of DPOF prints or the
number of DPOF pictures printed is high,
pictures may be printed several times. The
remaining number of prints indicated may
differ from the number set. This is not a
malfunction.
• With date printing, the setting on the
printer may take priority over the setting
on the camera. Check the date print
setting on the printer also.
• The message [USB MODE CHANGED.
PLEASE REMOVE THE USB CABLE.]
appears if you change the mode dial to a
mode other than [
] while the camera
and the printer are connected. Set the
mode dial to [
] again and then
disconnect the USB connection cable. If
this happens during printing, stop printing
and then disconnect the USB connection
cable.
• When the pictures in RAW files are to be
printed, the JPEG pictures recorded
simultaneously by the camera will be
printed. If JPEG pictures do not exit, RAW
file pictures cannot be printed.
2/2
_
[CARD SIZE] 54 mm
M85.6 mm
[10
M15cm]
100 mm
M150 mm
[4
SM6S]
101.6 mm
M152.4 mm
[8
SM10S]
203.2 mm
M254 mm
[LETTER] 216 mm
M279.4 mm
Settings on the printer are
prioritized.
1 picture with no frame on 1 page
1 picture with a frame on 1 page
2 pictures on 1 page
4 pictures on 1 page