Panasonic SV-AV20U - Manual (Page 54)

54
ª Erasing the Files Recorded on a
Memory Card ( l 29)
≥Erased files cannot be restored.
≥This SD Multi AV Device cannot erase any
music files (MP3 and MPEG2-AAC).
≥The files recorded in the Voice Record
mode are automatically locked. Release
the lock to erase them.
≥Do not erase the Voice files recorded with
this SD Multi AV Device using other
devices.
≥A locked file cannot be erased. Release
the lock to erase them.
≥No files can be erased if the write protect
switch on the SD Memory Card is set to
[LOCK].
≥If a file is erased on the SD Multi AV
Device, the DPOF information set by
another camera may also be erased.
≥A still picture file (other than JPEG) that
cannot be played back on the SD Multi AV
Device may be erased.
≥Erasing many files may take a little time.
Wait until the Card Access Lamp goes out.
≥Recorded voice data always has serial
numbers even after an arbitrary file is
deleted. For example, if [100]TRACK003
is deleted, the current [100]TRACK004
will change into [100]TRACK003 and the
files that follow will also change
accordingly.
≥Do not turn the power off or remove the
Memory Card while a file is being deleted.
Otherwise, the Memory Card may be
damaged.
≥Delete audio (VOICE) files on the SD Multi
AV Device.
ª Protecting files (File Protection)
( l 30)
≥Even if files are locked, the files will be
deleted when the Memory Card is
formatted.
≥Any music files (MPEG2-AAC and MP3)
cannot be locked or unlocked.
≥Files recorded by Voice Recording
Functions are automatically locked (to
prevent accidental erasure).
≥The File Protection carried out by this SD
Multi AV Device is only effective for this
SD Multi AV Device.
≥The SD Memory Card has a write
protection switch on it. If the switch is
moved to the [LOCK] side, you cannot
write to or format the Memory Card. If it is
moved back, you can.
≥Locking/Unlocking many files may take a
little time. Wait until the Card Access
Lamp goes out.
ª Writing Printing Data on a
Memory Card (DPOF Setting)
(
l 31)
≥DPOF is the abbreviation of Digital Print
Order Format. DPOF is used to select
images you want to print. DPOF can only
be used with products that support this
feature.
≥The number of prints can be set from 0 to
99.
≥This SD Multi AV Device may not
recognize the DPOF set by another type
of device.
≥DPOF-setting many files may take a little
time. Wait until the Card Access Lamp
goes out.
ª Playing back still pictures one by
one (P.Slide Show) ( l 32)
≥Playback time may take longer than usual
depending on the picture.
≥If the P. Slide show data is not recorded on
the Memory Card, the display reverts to
the picture index screen.
≥The time for the Slide show set by SD-
MovieStage Ver.2.0 is not applied to the
SD Multi AV Device.