English – Pioneer DRM-7000 User Manual

Page 43

Advertising
background image

43

<DRC1184>

En

English

12. Press the ESC key several times to return to user mode

and close the rear access door.

Press the ESC key

Press the ESC key

Press the ESC key

Press the ESC key

Press the ESC key

Close the rear access door

Initialization complete

As the remaining steps which must be performed may differ
depending on the changer control software being used, please
consult the manual for the changer control software being
used for further instructions.

Operation

NOTE:
If you will replace drives without using the procedure
described above, you must be more careful not to remove
the wrong drive. In such a case, the installation procedure of
the drive is the same as that described in “How to add a
drive” (on p. 38), and note that the conditions under which
the buzzer is sounded differ slightly.

Advertising
This manual is related to the following products: