Connecting to an av receiver, Connecting up 02 – Pioneer DV-595K-S User Manual

Page 12

Advertising
background image

Connecting up

02

12

En

Watching progressive scan video
from the component video outputs

This player can output progressive scan video
from the component video output. Compared
to interlace video, progressive scan video
effectively doubles the scanning rate of the
picture, resulting in a very stable, flicker-free
image.

To set up the player for use with a progressive
scan TV, see

Video Output settings

on page 39.

When the player is set to output progressive
scan video, the

PRGSVE

indicator lights in the

front panel display.

Important

• When

Component Out

(page 39) is set to

Progressive

, there is no video output from

the

VIDEO OUT

(composite) and

S

(S-

video) jacks.

• If you want to display video on more than

one monitor simultaneously, make sure
the player is set to

Interlace

.

• If you connect a TV that is not compatible

with a progressive scan signal and switch
the player to progressive, you will not be
able to see any picture at all. In this case,
switch everything off and reconnect using
the supplied video cable (see

Easy

connections

on page 10), then switch back

to

Interlace

(see below).

Switching the video output to interlace
using the front panel controls

Switch the player to standby then, using the
front panel controls, press

STANDBY/ON

while pressing

to switch the player back to

Interlace

.

DV-490V only:

If the player is connected

using HDMI, disconnect the HDMI cable
before resetting the player to interlace
output. (If left connected, the HDMI output

resolution will be reset to its default—see

Resetting the output resolution to the
default setting with HDMI connection

on

page 15.)

Connecting to an AV receiver

To enjoy multichannel surround sound you
need to connect this player to an AV receiver
using the digital audio output. This player has
both coaxial and optical digital jacks; use
whichever is convenient.

In addition to a digital connection, we
recommend also connecting using the stereo
analog connection.

DV-393

DV-490V

DV-595K

STANDBY/ON

STANDBY/ON

STANDBY/ON

DV393S_ASIA_EN.book 12 ページ 2006年5月12日 金曜日 午後7時50分

Advertising